Skip to main content

Doepfer A-100LC1V 48HP Vintage Low Cost Frame

The A-100LC1V is very similar to the A-100LC3 but offers only 48 HP for installation of modules. It is equipped with the power supply A-100SSB.

The case is made of wood with black coating.

Quantity of bus boards: 1 (short version with 8 module connectors)

Electrical specifications: mains voltage: 110 ... 240V~ (IEC connector at the rear panel, the mains cable is not included because of the many different versions for different countries) output voltages/current: +12V/380mA, -12V/380mA, +5V/100mA (the +5V current is taken from the +12V supply, i.e. the sum of the +12V current and the +5V current has to be less than 380mA)


Dimensions in mm:

  • outside: approx. 262 mm (W) x 154 mm (H) x 158 mm (D)
  • inside: 1 x 48 TE (244 mm) x 3 U

Usable depth for A-100 modules: approx. 110 / 45 mm (calculated from the inside of the front panel), in the right-hand area the installation depth is somewhat less because of the power supply unit (see illustration).


6U frame 7 connectors for modules

Choose your Language


Alex4 Distribution GmbH
Lessingstr. 98, 100 – Haus 11
13158 Berlin

This email address is being protected from spambots. You need JavaScript enabled to view it.

Tel +49(0)30 - 61 65 100 40
Fax +49(0)30 - 61 65 100 49

Cookie Consent

By continuing to browse or by clicking 'Accept', you agree to the storing of cookies on your device to enhance your site experience and for analytical purposes.